RESIN ROCKERS UV SKIM COAT 250G

Resin Rockers Skim Coat is the first UV Resin geared towards full coverage, quick coating for pen making, and other items such as scissor handles, badge clippers, handheld tools, and more! It has a self-leveling property that works like epoxy and is built for paper-thin coats. It is perfect for glittering your projects!

FULL COVERAGE WITHOUT THE PAINT! As long as you are using full coverage glitter, you will not need to paint your pens before glittering. Just sand, resin, glitter, and resin! DONE!

PLEASE READ:  Your safety is our #1 priority so it is important you follow all precautions. This goes with any brand of UV Resin. Resin Rockers UV Resin Skim Coat is a quick cure, medium viscosity coating resin, and adhesive chemical. Everyone reacts differently to everything, so it’s important to wear nitrile gloves, a respirator mask, and appropriate clothing to protect your skin, in addition to working in a well-ventilated area.

• Age recommendation for use is 15+
• Wear nitrile gloves to protect the skin in case of an allergy. We sell finger cots, but please note they are latex.
• Wear a mask if you have respiratory sensitivity. All brands of UV Resin can let off fumes when it first starts to cure. It is the chemical reaction that occurs when the UV light penetrates the resin itself. We always recommend safety precautions with any chemical product.

Lamp Wattage and Cure Time
We recommend using the MagicCure™️ LED Lamp - PLease see the lamp information to get more information on curing time! 

Uses

Very Thin Coats Done in Layers & Glazing
Great for layering thin coats with a gloved finger (Finger Cot) or thin silicone brush or paint brush. If coating pens, this formula is more viscous, allowing you to coat quicker and more even.

Repair & Adhesion
Adhere phone grip or badge reel blanks, rhinestones or pearls to your pieces (great to bling up your pens)

Sealing, and Protection
Finish custom pens or other pieces that require a thin coat while providing maximum UV protection to prevent yellowing over time

*Pro Tip: If adhering UV resin to a piece that was coated with epoxy first, sand lightly with 1200+ grit sandpaper and wipe clean with rubbing alcohol and a lint-free cloth

How to Coat with UV Resin Skim Coat:

Gloved Finger
Prep piece as directed and make sure it is clean. Using a gloved finger, squeeze a small amount directly onto the piece you would like to skim coat. In the same direction, run your gloved finger along the piece until an even coat is achieved. Add glitter or vinyl if you choose. Allow the resin to self-level and then cure under the lamp for 60-180 seconds. Repeat until you reach desired look.

What Products Can I Use with Resin Rockers UV Resin Skim Coat:

Glitter
Only use polyester glitter formulated for resin (PET). Do not use too much or your piece may be brittle. Resin makes the piece more durable and there needs to be enough of it throughout.

Pro Pearl Mica Pigment Powder
Use Pro Pearl sparingly (a dusting). If you use too much it will not cure properly.

• Works amazing on custom Pens!
• No tricks to the cure! No water method needed!
• NOT STICKY!
• Fast Curing - cures in about 60-90 seconds with a 24-54W UV or UV LED lamp
  *Cure times can vary based on the working environment, but typically, it is 60-120 seconds. 
• Safe
• Easy to Use
• Non-toxic Once Cured
• Medium Viscosity
• High Gloss Finish
• Extremely High UV Resistance Coating - Anti-yellowing

If cured correctly, the end result of Resin Rockers UV Resin Skim Coat is smooth, rock-solid, NON-TACKY and gorgeous!  

Active Ingredients: Acrylic UV Resin

Check out our Instructions and FAQs to learn more!

Sizes to Choose from:  1KG (35.2 oz.)
                                        250g (9 oz.)
                                        50g (1.7 oz.)
                                        30g (1 oz.)
                                        10g (.3 oz.)