Thermoflex Fashion Patterns are vibrant, easy to cut and weed, and have a slight stretch and rebound – just like ThermoFlex® Plus. Use ThermoFlex® Fashion Patterns to instantly create vibrant designs with just one material! It comes on a pressure-sensitive carrier for easy weeding.
*These patterns are cut just like regular HTV, in reverse. No additional transfer mask needed as it is already on the vinyl.
Care – Wash inside out, gentle cycle, cold water, tumble dry. Not suitable for dry-cleaning.
Applies to: Cotton, Uncoated Polyester, Acrylic, and similar fabrics Excluding Nylon
Special Precautions - We do not recommend layering anything on top of this product.
If sheet has an air bubble, use a needle to pop it from the back (non pattern side). This is not considered a flaw.
Size is +/- 0.50inch
Colors of products may be different than what the screen on your device shows. TIP: Always perform a test cut prior to cutting a whole design
Helpful tip-Specialty Materials recommends if your T shirt or material your are putting this HTV on says "dry fit", "Moisture Wicking", or is Gildan Ultra Cotton, use a spray bottle of rubbing alcohol and squirt the material where you are putting the design. Then rub it in a bit with a cloth and dry or even heat press it to dry then press the design. This is due to the material being a coated material, instead of an un coated material.