Resin Rockers Perfect Finish Epoxy Resin was formulated with the tumbler artist in mind. It is built to perform seamlessly with most substrates and all techniques involved in tumbler making and crafts. Perfect Finish is a low odor, easy to use, medium viscosity, 1:1 ratio, 2-part epoxy system that cures to the ultimate crystal clear, scratch-resistant finish. Carefully engineered with UV and HALS for advanced protection against premature yellowing with a long working time and a seamless finish.
Perfect Finish can be used on all types and variations of tumblers including glitter vinyl, micas, pigment flakes, alcohol inks and more to create that one-of-a-kind piece AND to add a rock-hard topcoat. It can also be used to coat UV Resin tumbler applications such as drips and embellishments.
High UV Resistance
Superior Gloss Finish
100% VOC Free & Low Odor
Advanced Formula for Strength & Scratch Resistance
500 degree F heat resistance
Step 1: Prep For best results, the ideal working temperature is between 75°-85°F. Work in a clean, dust-free environment with low humidity. Step 2: Measure Pour equal amounts of resin and hardener into a mixing container.
20oz Tumbler – 20mL
30oz Tumbler – 30mL
40oz + Tumbler – 40 mL
Step 3: Mix Stir thoroughly for 1-3 minutes, continuously scraping the sides and bottom of the mixing container. Transfer into a new, clean mixing container and mix again for another 1-2 minutes.
Step 4: Pour Pour immediately onto your tumbler. Spread epoxy evenly. If bubbles appear, use a propane torch held 6 inches away and sweep rapidly until bubbles disappear. One pass should suffice. Step 5: Set For the best curing results, room temperature should remain between 75°-85°F. Cured to the touch in 24 hours, fully cured in 72 hours.
Step 6: Clean up Wipe down your mixing tools before the resin dries. Uncured resin can be cleaned up with acetone.